NeroLOOP [T/O Series]

Process Description

Storage & distribution system for clean utilities.

A distribution system should transport the water to use points at the required flow, temperature, and pressure. Additionally, the storage and distribution system should not allow the water quality to degrade below the appropriate quality for its designated end use.

Key Features

  • Simple plug & play operation philosophy – short on site installation & optimized project execution schedule.
  • A complete Pre validated, Pre wired, Pre tested Purified Water Distribution and sanitization skid.
  • Design as per ASME-BPE, ASTM, ISPE , MHRA, ENVISA, cGMP, WHO ETC. GUIDELINES.
  • Stage wise sanitary sampling points.
  • Constructed form 316/L stainless steel, internal surface finish upto 0.38Ra.
  • cGMP, GAMP & 21 CFR complaint.
  • Flexible system integration with other technologies.
  • Designed for robust & safe operation.
  • Validation to regulatory & client standards or as per GMP, cGMP, ISEP, USP, EP, JP, IP etc guidelines.

Options

  • Option 1 : Ambient or Reduced Temperature Storage & Distribution (Heat or Chemical Sanitization).
  • Option 2 : Storage & Distribution with Continuous Polishing.
  • Option 3 : Branched / One Way Distribution.
  • Option 4 : Parallel Distribution Loops from Single Tank.
  • Option 5 : Hot Storage, Cooled & Reheated Distribution.
  • Option 6 : Hot Storage, Cooled Bypass Circulating Distribution.
  • Option 7 : Hot Distribution with Cooled  Sub – loop.
  • Option 8 : Primary / Secondary Distribution.
  • Option 9 : Other Options based on user requirements.